//
// This file is part of Dire Wolf, an amateur radio packet TNC.
//
// Copyright (C) 2011 , 2013, 2014, 2015 John Langner, WB2OSZ
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
/*------------------------------------------------------------------
*
* Name: ax25_pad
*
* Purpose: Packet assembler and disasembler.
*
* We can obtain AX.25 packets from different sources:
*
* (a) from an HDLC frame.
* (b) from text representation.
* (c) built up piece by piece.
*
* We also want to use a packet in different ways:
*
* (a) transmit as an HDLC frame.
* (b) print in human-readable text.
* (c) take it apart piece by piece.
*
* Looking at the more general case, we also want to modify
* an existing packet. For instance an APRS repeater might
* want to change "WIDE2-2" to "WIDE2-1" and retransmit it.
*
*
* Description:
*
*
* APRS uses only UI frames.
* Each starts with 2-10 addressses (14-70 octets):
*
* * Destination Address (note: opposite order in printed format)
*
* * Source Address
*
* * 0-8 Digipeater Addresses (Could there ever be more as a result of
* digipeaters inserting their own call for
* the tracing feature?
* NO. The limit is 8 when transmitting AX.25 over the
* radio.
* Communication with an IGate server could
* have a longer VIA path but that is only in text form,
* not as an AX.25 frame.)
*
* Each address is composed of:
*
* * 6 upper case letters or digits, blank padded.
* These are shifted left one bit, leaving the LSB always 0.
*
* * a 7th octet containing the SSID and flags.
* The LSB is always 0 except for the last octet of the address field.
*
* The final octet of the Destination has the form:
*
* C R R SSID 0, where,
*
* C = command/response = 1
* R R = Reserved = 1 1
* SSID = substation ID
* 0 = zero
*
* The final octet of the Source has the form:
*
* C R R SSID 0, where,
*
* C = command/response = 1
* R R = Reserved = 1 1
* SSID = substation ID
* 0 = zero (or 1 if no repeaters)
*
* The final octet of each repeater has the form:
*
* H R R SSID 0, where,
*
* H = has-been-repeated = 0 initially.
* Set to 1 after this address has been used.
* R R = Reserved = 1 1
* SSID = substation ID
* 0 = zero (or 1 if last repeater in list)
*
* A digipeater would repeat this frame if it finds its address
* with the "H" bit set to 0 and all earlier repeater addresses
* have the "H" bit set to 1.
* The "H" bit would be set to 1 in the repeated frame.
*
* In standard monitoring format, an asterisk is displayed after the last
* digipeater with the "H" bit set. That indicates who you are hearing
* over the radio.
* (That is if digipeaters update the via path properly. Some don't so
* we don't know who we are hearing. This is discussed in the User Guide.)
* No asterisk means the source is being heard directly.
*
* Example, if we can hear all stations involved,
*
* SRC>DST,RPT1,RPT2,RPT3: -- we heard SRC
* SRC>DST,RPT1*,RPT2,RPT3: -- we heard RPT1
* SRC>DST,RPT1,RPT2*,RPT3: -- we heard RPT2
* SRC>DST,RPT1,RPT2,RPT3*: -- we heard RPT3
*
*
* Next we have:
*
* * One byte Control Field - APRS uses 3 for UI frame
* The more general AX.25 frame can have two.
*
* * One byte Protocol ID - APRS uses 0xf0 for no layer 3
*
* Finally the Information Field of 1-256 bytes.
*
* And, of course, the 2 byte CRC.
*
* The descriptions above, for the C, H, and RR bits, are for APRS usage.
* When operating as a KISS TNC we just pass everything along and don't
* interpret or change them.
*
*
* Constructors: ax25_init - Clear everything.
* ax25_from_text - Tear apart a text string
* ax25_from_frame - Tear apart an AX.25 frame.
* Must be called before any other function.
*
* Get methods: .... - Extract destination, source, or digipeater
* address from frame.
*
* Assumptions: CRC has already been verified to be correct.
*
*------------------------------------------------------------------*/
#define AX25_PAD_C /* this will affect behavior of ax25_pad.h */
#include <stdlib.h>
#include <string.h>
#include <assert.h>
#include <stdio.h>
#include <ctype.h>
#ifndef _POSIX_C_SOURCE
#define _POSIX_C_SOURCE 1
#endif
#include "regex.h"
#if __WIN32__
char *strtok_r(char *str, const char *delim, char **saveptr);
#endif
#include "direwolf.h"
#include "ax25_pad.h"
#include "textcolor.h"
#include "fcs_calc.h"
/*
* Accumulate statistics.
* If new_count gets much larger than delete_count plus the size of
* the transmit queue we have a memory leak.
*/
static volatile int new_count = 0;
static volatile int delete_count = 0;
static volatile int last_seq_num = 0;
#if AX25MEMDEBUG
int ax25memdebug = 0;
void ax25memdebug_set(void)
{
ax25memdebug = 1;
}
int ax25memdebug_get (void)
{
return (ax25memdebug);
}
int ax25memdebug_seq (packet_t this_p)
{
return (this_p->seq);
}
#endif
#define CLEAR_LAST_ADDR_FLAG this_p->frame_data[this_p->num_addr*7-1] &= ~ SSID_LAST_MASK
#define SET_LAST_ADDR_FLAG this_p->frame_data[this_p->num_addr*7-1] |= SSID_LAST_MASK
/*------------------------------------------------------------------------------
*
* Name: ax25_new
*
* Purpose: Allocate memory for a new packet object.
*
* Returns: Identifier for a new packet object.
* In the current implementation this happens to be a pointer.
*
*------------------------------------------------------------------------------*/
packet_t ax25_new (void)
{
struct packet_s *this_p;
#if DEBUG
text_color_set(DW_COLOR_DEBUG);
dw_printf ("ax25_new(): before alloc, new=%d, delete=%d\n", new_count, delete_count);
#endif
last_seq_num++;
new_count++;
/*
* check for memory leak.
*/
if (new_count > delete_count + 100) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Report to WB2OSZ - Memory leak for packet objects. new=%d, delete=%d\n", new_count, delete_count);
#if AX25MEMDEBUG
// Force on debug option to gather evidence.
ax25memdebug_set();
#endif
}
this_p = calloc(sizeof (struct packet_s), (size_t)1);
if (this_p == NULL) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("ERROR - can't allocate memory in ax25_new.\n");
}
assert (this_p != NULL);
this_p->magic1 = MAGIC;
this_p->seq = last_seq_num;
this_p->magic2 = MAGIC;
this_p->num_addr = (-1);
return (this_p);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_delete
*
* Purpose: Destroy a packet object, freeing up memory it was using.
*
*------------------------------------------------------------------------------*/
#if AX25MEMDEBUG
void ax25_delete_debug (packet_t this_p, char *src_file, int src_line)
#else
void ax25_delete (packet_t this_p)
#endif
{
#if DEBUG
text_color_set(DW_COLOR_DEBUG);
dw_printf ("ax25_delete(): before free, new=%d, delete=%d\n", new_count, delete_count);
#endif
if (this_p == NULL) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("ERROR - NULL pointer passed to ax25_delete.\n");
return;
}
delete_count++;
#if AX25MEMDEBUG
if (ax25memdebug) {
text_color_set(DW_COLOR_DEBUG);
dw_printf ("ax25_delete, seq=%d, called from %s %d, new_count=%d, delete_count=%d\n", this_p->seq, src_file, src_line, new_count, delete_count);
}
#endif
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
this_p->magic1 = 0;
this_p->magic1 = 0;
//memset (this_p, 0, sizeof (struct packet_s));
free (this_p);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_from_text
*
* Purpose: Parse a frame in human-readable monitoring format and change
* to internal representation.
*
* Input: monitor - "TNC-2" format of a monitored packet. i.e.
* source>dest[,repeater1,repeater2,...]:information
*
* strict - True to enforce rules for packets sent over the air.
* False to be more lenient for packets from IGate server.
*
* Messages from an IGate server can have longer
* addresses after qAC. Up to 9 observed so far.
*
* We can just truncate the name because we will only
* end up discarding it. TODO: check on this.
*
* Returns: Pointer to new packet object in the current implementation.
*
* Outputs: Use the "get" functions to retrieve information in different ways.
*
*------------------------------------------------------------------------------*/
#if AX25MEMDEBUG
packet_t ax25_from_text_debug (char *monitor, int strict, char *src_file, int src_line)
#else
packet_t ax25_from_text (char *monitor, int strict)
#endif
{
/*
* Tearing it apart is destructive so make our own copy first.
*/
char stuff[512];
char *pinfo;
char *pa;
char *saveptr; /* Used with strtok_r because strtok is not thread safe. */
static int first_time = 1;
static regex_t unhex_re;
int e;
char emsg[100];
#define MAXMATCH 1
regmatch_t match[MAXMATCH];
int keep_going;
char temp[512];
int ssid_temp, heard_temp;
char atemp[AX25_MAX_ADDR_LEN];
packet_t this_p = ax25_new ();
#if AX25MEMDEBUG
if (ax25memdebug) {
text_color_set(DW_COLOR_DEBUG);
dw_printf ("ax25_from_text, seq=%d, called from %s %d\n", this_p->seq, src_file, src_line);
}
#endif
/* Is it possible to have a nul character (zero byte) in the */
/* information field of an AX.25 frame? */
/* Yes, but it would be difficult in the from-text case. */
strlcpy (stuff, monitor, sizeof(stuff));
/*
* Translate hexadecimal values like <0xff> to non-printing characters.
* MIC-E message type uses 5 different non-printing characters.
*/
if (first_time)
{
e = regcomp (&unhex_re, "<0x[0-9a-fA-F][0-9a-fA-F]>", 0);
if (e) {
regerror (e, &unhex_re, emsg, sizeof(emsg));
text_color_set(DW_COLOR_ERROR);
dw_printf ("%s:%d: %s\n", __FILE__, __LINE__, emsg);
}
first_time = 0;
}
#if 0
text_color_set(DW_COLOR_DEBUG);
dw_printf ("BEFORE: %s\n", stuff);
ax25_safe_print (stuff, -1, 0);
dw_printf ("\n");
#endif
keep_going = 1;
while (keep_going) {
if (regexec (&unhex_re, stuff, MAXMATCH, match, 0) == 0) {
int n;
char *p;
stuff[match[0].rm_so + 5] = '\0';
n = strtol (stuff + match[0].rm_so + 3, &p, 16);
stuff[match[0].rm_so] = n;
strlcpy (temp, stuff + match[0].rm_eo, sizeof(temp));
strlcpy (stuff + match[0].rm_so + 1, temp, sizeof(stuff)-match[0].rm_so-1);
}
else {
keep_going = 0;
}
}
#if 0
text_color_set(DW_COLOR_DEBUG);
dw_printf ("AFTER: %s\n", stuff);
ax25_safe_print (stuff, -1, 0);
dw_printf ("\n");
#endif
/*
* Initialize the packet with two addresses and control/pid
* for APRS.
*/
memset (this_p->frame_data + AX25_DESTINATION*7, ' ' << 1, 6);
this_p->frame_data[AX25_DESTINATION*7+6] = SSID_H_MASK | SSID_RR_MASK;
memset (this_p->frame_data + AX25_SOURCE*7, ' ' << 1, 6);
this_p->frame_data[AX25_SOURCE*7+6] = SSID_H_MASK | SSID_RR_MASK | SSID_LAST_MASK;
this_p->frame_data[14] = AX25_UI_FRAME;
this_p->frame_data[15] = AX25_NO_LAYER_3;
this_p->frame_len = 7 + 7 + 1 + 1;
this_p->num_addr = (-1);
assert (ax25_get_num_addr(this_p) == 2);
/*
* Separate the addresses from the rest.
*/
pinfo = strchr (stuff, ':');
if (pinfo == NULL) {
ax25_delete (this_p);
return (NULL);
}
*pinfo = '\0';
pinfo++;
if (strlen(pinfo) > AX25_MAX_INFO_LEN) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Warning: Information part truncated to %d characters.\n", AX25_MAX_INFO_LEN);
pinfo[AX25_MAX_INFO_LEN] = '\0';
}
/*
* Separate the addresses.
* Note that source and destination order is swappped.
*/
/*
* Source address.
* Don't use traditional strtok because it is not thread safe.
*/
pa = strtok_r (stuff, ">", &saveptr);
if (pa == NULL) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Failed to create packet from text. No source address\n");
ax25_delete (this_p);
return (NULL);
}
if ( ! ax25_parse_addr (AX25_SOURCE, pa, strict, atemp, &ssid_temp, &heard_temp)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Failed to create packet from text. Bad source address\n");
ax25_delete (this_p);
return (NULL);
}
ax25_set_addr (this_p, AX25_SOURCE, atemp);
ax25_set_h (this_p, AX25_SOURCE); // c/r in this position
ax25_set_ssid (this_p, AX25_SOURCE, ssid_temp);
/*
* Destination address.
*/
pa = strtok_r (NULL, ",", &saveptr);
if (pa == NULL) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Failed to create packet from text. No destination address\n");
ax25_delete (this_p);
return (NULL);
}
if ( ! ax25_parse_addr (AX25_DESTINATION, pa, strict, atemp, &ssid_temp, &heard_temp)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Failed to create packet from text. Bad destination address\n");
ax25_delete (this_p);
return (NULL);
}
ax25_set_addr (this_p, AX25_DESTINATION, atemp);
ax25_set_h (this_p, AX25_DESTINATION); // c/r in this position
ax25_set_ssid (this_p, AX25_DESTINATION, ssid_temp);
/*
* VIA path.
*/
while (( pa = strtok_r (NULL, ",", &saveptr)) != NULL && this_p->num_addr < AX25_MAX_ADDRS ) {
//char *last;
int k;
k = this_p->num_addr;
if ( ! ax25_parse_addr (k, pa, strict, atemp, &ssid_temp, &heard_temp)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Failed to create packet from text. Bad digipeater address\n");
ax25_delete (this_p);
return (NULL);
}
ax25_set_addr (this_p, k, atemp);
ax25_set_ssid (this_p, k, ssid_temp);
// Does it have an "*" at the end?
// TODO: Complain if more than one "*".
// Could also check for all has been repeated bits are adjacent.
if (heard_temp) {
for ( ; k >= AX25_REPEATER_1; k--) {
ax25_set_h (this_p, k);
}
}
}
/*
* Append the info part.
*/
strlcpy ((char*)(this_p->frame_data+this_p->frame_len), pinfo, sizeof(this_p->frame_data)-this_p->frame_len);
this_p->frame_len += strlen(pinfo);
return (this_p);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_from_frame
*
* Purpose: Split apart an HDLC frame to components.
*
* Inputs: fbuf - Pointer to beginning of frame.
*
* flen - Length excluding the two FCS bytes.
*
* alevel - Audio level of received signal.
* Maximum range 0 - 100.
* -1 might be used when not applicable.
*
* Returns: Pointer to new packet object or NULL if error.
*
* Outputs: Use the "get" functions to retrieve information in different ways.
*
*------------------------------------------------------------------------------*/
#if AX25MEMDEBUG
packet_t ax25_from_frame_debug (unsigned char *fbuf, int flen, alevel_t alevel, char *src_file, int src_line)
#else
packet_t ax25_from_frame (unsigned char *fbuf, int flen, alevel_t alevel)
#endif
{
packet_t this_p;
/*
* First make sure we have an acceptable length:
*
* We are not concerned with the FCS (CRC) because someone else checked it.
*
* Is is possible to have zero length for info?
*
* In the original version, assuming APRS, the answer was no.
* We always had at least 3 octets after the address part:
* control, protocol, and first byte of info part for data type.
*
* In later versions, this restriction was relaxed so other
* variations of AX.25 could be used. Now the minimum length
* is 7+7 for addresses plus 1 for control.
*
*/
if (flen < AX25_MIN_PACKET_LEN || flen > AX25_MAX_PACKET_LEN)
{
text_color_set(DW_COLOR_ERROR);
dw_printf ("Frame length %d not in allowable range of %d to %d.\n", flen, AX25_MIN_PACKET_LEN, AX25_MAX_PACKET_LEN);
return (NULL);
}
this_p = ax25_new ();
#if AX25MEMDEBUG
if (ax25memdebug) {
text_color_set(DW_COLOR_DEBUG);
dw_printf ("ax25_from_frame, seq=%d, called from %s %d\n", this_p->seq, src_file, src_line);
}
#endif
/* Copy the whole thing intact. */
memcpy (this_p->frame_data, fbuf, flen);
this_p->frame_data[flen] = 0;
this_p->frame_len = flen;
/* Find number of addresses. */
this_p->num_addr = (-1);
(void) ax25_get_num_addr (this_p);
return (this_p);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_dup
*
* Purpose: Make a copy of given packet object.
*
* Inputs: copy_from - Existing packet object.
*
* Returns: Pointer to new packet object or NULL if error.
*
*
*------------------------------------------------------------------------------*/
#if AX25MEMDEBUG
packet_t ax25_dup_debug (packet_t copy_from, char *src_file, int src_line)
#else
packet_t ax25_dup (packet_t copy_from)
#endif
{
int save_seq;
packet_t this_p;
this_p = ax25_new ();
assert (this_p != NULL);
save_seq = this_p->seq;
memcpy (this_p, copy_from, sizeof (struct packet_s));
this_p->seq = save_seq;
#if AX25MEMDEBUG
if (ax25memdebug) {
text_color_set(DW_COLOR_DEBUG);
dw_printf ("ax25_dup, seq=%d, called from %s %d, clone of seq %d\n", this_p->seq, src_file, src_line, copy_from->seq);
}
#endif
return (this_p);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_parse_addr
*
* Purpose: Parse address with optional ssid.
*
* Inputs: position - AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER_1...
* Used for more specific error message. -1 if not used.
*
* in_addr - Input such as "WB2OSZ-15*"
*
* strict - TRUE for strict checking (6 characters, no lower case,
* SSID must be in range of 0 to 15).
* Strict is appropriate for packets sent
* over the radio. Communication with IGate
* allows lower case (e.g. "qAR") and two
* alphanumeric characters for the SSID.
* We also get messages like this from a server.
* KB1POR>APU25N,TCPIP*,qAC,T2NUENGLD:...
*
* Outputs: out_addr - Address without any SSID.
* Must be at least AX25_MAX_ADDR_LEN bytes.
*
* out_ssid - Numeric value of SSID.
*
* out_heard - True if "*" found.
*
* Returns: True (1) if OK, false (0) if any error.
*
*
*------------------------------------------------------------------------------*/
static const char *position_name[1 + AX25_MAX_ADDRS] = {
"", "Destination ", "Source ",
"Digi1 ", "Digi2 ", "Digi3 ", "Digi4 ",
"Digi5 ", "Digi6 ", "Digi7 ", "Digi8 " };
int ax25_parse_addr (int position, char *in_addr, int strict, char *out_addr, int *out_ssid, int *out_heard)
{
char *p;
char sstr[8]; /* Should be 1 or 2 digits for SSID. */
int i, j, k;
int maxlen;
*out_addr = '\0';
*out_ssid = 0;
*out_heard = 0;
if (strict && strlen(in_addr) >= 2 && strncmp(in_addr, "qA", 2) == 0) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("%sAddress \"%s\" is a \"q-construct\" used for communicating\n", position_name[position], in_addr);
dw_printf ("with APRS Internet Servers. It was not expected here.\n");
}
//dw_printf ("ax25_parse_addr in: %s\n", in_addr);
if (position < -1) position = -1;
if (position > AX25_REPEATER_8) position = AX25_REPEATER_8;
position++; /* Adjust for position_name above. */
maxlen = strict ? 6 : (AX25_MAX_ADDR_LEN-1);
p = in_addr;
i = 0;
for (p = in_addr; isalnum(*p); p++) {
if (i >= maxlen) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("%sAddress is too long. \"%s\" has more than %d characters.\n", position_name[position], in_addr, maxlen);
return 0;
}
out_addr[i++] = *p;
out_addr[i] = '\0';
if (strict && islower(*p)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("%sAddress has lower case letters. \"%s\" must be all upper case.\n", position_name[position], in_addr);
return 0;
}
}
j = 0;
sstr[j] = '\0';
if (*p == '-') {
for (p++; isalnum(*p); p++) {
if (j >= 2) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("%sSSID is too long. SSID part of \"%s\" has more than 2 characters.\n", position_name[position], in_addr);
return 0;
}
sstr[j++] = *p;
sstr[j] = '\0';
if (strict && ! isdigit(*p)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("%sSSID must be digits. \"%s\" has letters in SSID.\n", position_name[position], in_addr);
return 0;
}
}
k = atoi(sstr);
if (k < 0 || k > 15) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("%sSSID out of range. SSID of \"%s\" not in range of 0 to 15.\n", position_name[position], in_addr);
return 0;
}
*out_ssid = k;
}
if (*p == '*') {
*out_heard = 1;
p++;
}
if (*p != '\0') {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Invalid character \"%c\" found in %saddress \"%s\".\n", *p, position_name[position], in_addr);
return 0;
}
//dw_printf ("ax25_parse_addr out: %s %d %d\n", out_addr, *out_ssid, *out_heard);
return (1);
} /* end ax25_parse_addr */
/*-------------------------------------------------------------------
*
* Name: ax25_check_addresses
*
* Purpose: Check addresses of given packet and print message if any issues.
* We call this when receiving and transmitting.
*
* Inputs: pp - packet object pointer.
*
* Errors: Print error message.
*
* Returns: 1 for all valid. 0 if not.
*
* Examples: I was surprised to get this from an APRS-IS server with
* a lower case source address.
*
* n1otx>APRS,TCPIP*,qAC,THIRD:@141335z4227.48N/07111.73W_348/005g014t044r000p000h60b10075.wview_5_20_2
*
* I haven't gotten to the bottom of this yet but it sounds
* like "q constructs" are somehow getting on to the air when
* they should only appear in conversations with IGate servers.
*
* https://groups.yahoo.com/neo/groups/direwolf_packet/conversations/topics/678
*
* WB0VGI-7>APDW12,W0YC-5*,qAR,AE0RF-10:}N0DZQ-10>APWW10,TCPIP,WB0VGI-7*:;145.230MN*080306z4607.62N/09230.58WrKE0ACL/R 145.230- T146.2 (Pine County ARES)
*
* Typical result:
*
* Digipeater WIDE2 (probably N3LEE-4) audio level = 28(10/6) [NONE] __|||||||
* [0.5] VE2DJE-9>P_0_P?,VE2PCQ-3,K1DF-7,N3LEE-4,WIDE2*:'{S+l <0x1c>>/
* Invalid character "_" in MIC-E destination/latitude.
* Invalid character "_" in MIC-E destination/latitude.
* Invalid character "?" in MIC-E destination/latitude.
* Invalid MIC-E N/S encoding in 4th character of destination.
* Invalid MIC-E E/W encoding in 6th character of destination.
* MIC-E, normal car (side view), Unknown manufacturer, Returning
* N 00 00.0000, E 005 55.1500, 0 MPH
* Invalid character "_" found in Destination address "P_0_P?".
*
* *** The origin and journey of this packet should receive some scrutiny. ***
*
*--------------------------------------------------------------------*/
int ax25_check_addresses (packet_t pp)
{
int n;
char addr[AX25_MAX_ADDR_LEN];
char ignore1[AX25_MAX_ADDR_LEN];
int ignore2, ignore3;
int all_ok = 1;
for (n = 0; n < ax25_get_num_addr(pp); n++) {
ax25_get_addr_with_ssid (pp, n, addr);
all_ok &= ax25_parse_addr (n, addr, 1, ignore1, &ignore2, &ignore3);
}
if (! all_ok) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("\n");
dw_printf ("*** The origin and journey of this packet should receive some scrutiny. ***\n");
dw_printf ("\n");
}
return (all_ok);
} /* end ax25_check_addresses */
/*------------------------------------------------------------------------------
*
* Name: ax25_unwrap_third_party
*
* Purpose: Unwrap a third party messge from the header.
*
* Inputs: copy_from - Existing packet object.
*
* Returns: Pointer to new packet object or NULL if error.
*
* Example: Input: A>B,C:}D>E,F:info
* Output: D>E,F:info
*
*------------------------------------------------------------------------------*/
packet_t ax25_unwrap_third_party (packet_t from_pp)
{
unsigned char *info_p;
packet_t result_pp;
if (ax25_get_dti(from_pp) != '}') {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error: ax25_unwrap_third_party: wrong data type.\n");
return (NULL);
}
(void) ax25_get_info (from_pp, &info_p);
result_pp = ax25_from_text((char *)info_p + 1, 0);
return (result_pp);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_set_addr
*
* Purpose: Add or change an address.
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* Must be either an existing address or one greater
* than the final which causes a new one to be added.
*
* ad - Address with optional dash and substation id.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* TODO: ax25_from_text could use this.
*
* Returns: None.
*
*------------------------------------------------------------------------------*/
void ax25_set_addr (packet_t this_p, int n, char *ad)
{
int ssid_temp, heard_temp;
char atemp[AX25_MAX_ADDR_LEN];
int i;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
assert (n >= 0 && n < AX25_MAX_ADDRS);
//dw_printf ("ax25_set_addr (%d, %s) num_addr=%d\n", n, ad, this_p->num_addr);
if (n >= 0 && n < this_p->num_addr) {
//dw_printf ("ax25_set_addr , existing case\n");
/*
* Set existing address position.
*/
// Why aren't we setting 'strict' here?
// Messages from IGate have q-constructs.
// We use this to parse it and later remove unwanted parts.
ax25_parse_addr (n, ad, 0, atemp, &ssid_temp, &heard_temp);
memset (this_p->frame_data + n*7, ' ' << 1, 6);
for (i=0; i<6 && atemp[i] != '\0'; i++) {
this_p->frame_data[n*7+i] = atemp[i] << 1;
}
ax25_set_ssid (this_p, n, ssid_temp);
}
else if (n == this_p->num_addr) {
//dw_printf ("ax25_set_addr , appending case\n");
/*
* One beyond last position, process as insert.
*/
ax25_insert_addr (this_p, n, ad);
}
else {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error, ax25_set_addr, bad position %d for '%s'\n", n, ad);
}
//dw_printf ("------\n");
//dw_printf ("dump after ax25_set_addr (%d, %s)\n", n, ad);
//ax25_hex_dump (this_p);
//dw_printf ("------\n");
}
/*------------------------------------------------------------------------------
*
* Name: ax25_insert_addr
*
* Purpose: Insert address at specified position, shifting others up one
* position.
* This is used when a digipeater wants to insert its own call
* for tracing purposes.
* For example:
* W1ABC>TEST,WIDE3-3
* Would become:
* W1ABC>TEST,WB2OSZ-1*,WIDE3-2
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* ad - Address with optional dash and substation id.
*
* Bugs: Little validity or bounds checking is performed. Be careful.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: None.
*
*
*------------------------------------------------------------------------------*/
void ax25_insert_addr (packet_t this_p, int n, char *ad)
{
int ssid_temp, heard_temp;
char atemp[AX25_MAX_ADDR_LEN];
int i;
int expect;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
assert (n >= AX25_REPEATER_1 && n < AX25_MAX_ADDRS);
//dw_printf ("ax25_insert_addr (%d, %s)\n", n, ad);
/* Don't do it if we already have the maximum number. */
/* Should probably return success/fail code but currently the caller doesn't care. */
if ( this_p->num_addr >= AX25_MAX_ADDRS) {
return;
}
CLEAR_LAST_ADDR_FLAG;
this_p->num_addr++;
memmove (this_p->frame_data + (n+1)*7, this_p->frame_data + n*7, this_p->frame_len - (n*7));
memset (this_p->frame_data + n*7, ' ' << 1, 6);
this_p->frame_len += 7;
this_p->frame_data[n*7+6] = SSID_RR_MASK;
SET_LAST_ADDR_FLAG;
// Why aren't we setting 'strict' here?
// Messages from IGate have q-constructs.
// We use this to parse it and later remove unwanted parts.
ax25_parse_addr (n, ad, 0, atemp, &ssid_temp, &heard_temp);
memset (this_p->frame_data + n*7, ' ' << 1, 6);
for (i=0; i<6 && atemp[i] != '\0'; i++) {
this_p->frame_data[n*7+i] = atemp[i] << 1;
}
ax25_set_ssid (this_p, n, ssid_temp);
// Sanity check after messing with number of addresses.
expect = this_p->num_addr;
this_p->num_addr = (-1);
if (expect != ax25_get_num_addr (this_p)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error ax25_remove_addr expect %d, actual %d\n", expect, this_p->num_addr);
}
}
/*------------------------------------------------------------------------------
*
* Name: ax25_remove_addr
*
* Purpose: Remove address at specified position, shifting others down one position.
* This is used when we want to remove something from the digipeater list.
*
* Inputs: n - Index of address. Use the symbols
* AX25_REPEATER1, AX25_REPEATER2, etc.
*
* Bugs: Little validity or bounds checking is performed. Be careful.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: None.
*
*
*------------------------------------------------------------------------------*/
void ax25_remove_addr (packet_t this_p, int n)
{
int expect;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
assert (n >= AX25_REPEATER_1 && n < AX25_MAX_ADDRS);
/* Shift those beyond to fill this position. */
CLEAR_LAST_ADDR_FLAG;
this_p->num_addr--;
memmove (this_p->frame_data + n*7, this_p->frame_data + (n+1)*7, this_p->frame_len - ((n+1)*7));
this_p->frame_len -= 7;
SET_LAST_ADDR_FLAG;
// Sanity check after messing with number of addresses.
expect = this_p->num_addr;
this_p->num_addr = (-1);
if (expect != ax25_get_num_addr (this_p)) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error ax25_remove_addr expect %d, actual %d\n", expect, this_p->num_addr);
}
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_num_addr
*
* Purpose: Return number of addresses in current packet.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: Number of addresses in the current packet.
* Should be in the range of 2 .. AX25_MAX_ADDRS.
*
* Version 0.9: Could be zero for a non AX.25 frame in KISS mode.
*
*------------------------------------------------------------------------------*/
int ax25_get_num_addr (packet_t this_p)
{
//unsigned char *pf;
int a;
int addr_bytes;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
/* Use cached value if already set. */
if (this_p->num_addr >= 0) {
return (this_p->num_addr);
}
/* Otherwise, determine the number ofaddresses. */
this_p->num_addr = 0; /* Number of addresses extracted. */
addr_bytes = 0;
for (a = 0; a < this_p->frame_len && addr_bytes == 0; a++) {
if (this_p->frame_data[a] & SSID_LAST_MASK) {
addr_bytes = a + 1;
}
}
if (addr_bytes % 7 == 0) {
int addrs = addr_bytes / 7;
if (addrs >= AX25_MIN_ADDRS && addrs <= AX25_MAX_ADDRS) {
this_p->num_addr = addrs;
}
}
return (this_p->num_addr);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_num_repeaters
*
* Purpose: Return number of repeater addresses in current packet.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: Number of addresses in the current packet - 2.
* Should be in the range of 0 .. AX25_MAX_ADDRS - 2.
*
*------------------------------------------------------------------------------*/
int ax25_get_num_repeaters (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (this_p->num_addr >= 2) {
return (this_p->num_addr - 2);
}
return (0);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_addr_with_ssid
*
* Purpose: Return specified address with any SSID in current packet.
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* Outputs: station - String representation of the station, including the SSID.
* e.g. "WB2OSZ-15"
* Usually variables will be AX25_MAX_ADDR_LEN bytes
* but 10 would be adequate.
*
* Bugs: No bounds checking is performed. Be careful.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: Character string in usual human readable format,
*
*
*------------------------------------------------------------------------------*/
void ax25_get_addr_with_ssid (packet_t this_p, int n, char *station)
{
int ssid;
char sstr[8]; /* Should be 1 or 2 digits for SSID. */
int i;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (n < 0) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error detected in ax25_get_addr_with_ssid, %s, line %d.\n", __FILE__, __LINE__);
dw_printf ("Address index, %d, is less than zero.\n", n);
strlcpy (station, "??????", 10);
return;
}
if (n >= this_p->num_addr) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error detected in ax25_get_addr_with_ssid, %s, line %d.\n", __FILE__, __LINE__);
dw_printf ("Address index, %d, is too large for number of addresses, %d.\n", n, this_p->num_addr);
strlcpy (station, "??????", 10);
return;
}
memset (station, 0, 7);
for (i=0; i<6; i++) {
unsigned char ch;
ch = (this_p->frame_data[n*7+i] >> 1) & 0x7f;
if (ch <= ' ') break;
station[i] = ch;
}
ssid = ax25_get_ssid (this_p, n);
if (ssid != 0) {
snprintf (sstr, sizeof(sstr), "-%d", ssid);
strlcat (station, sstr, 10);
}
} /* end ax25_get_addr_with_ssid */
/*------------------------------------------------------------------------------
*
* Name: ax25_get_addr_no_ssid
*
* Purpose: Return specified address WITHOUT any SSID.
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* Outputs: station - String representation of the station, WITHOUT the SSID.
* e.g. "WB2OSZ"
* Usually variables will be AX25_MAX_ADDR_LEN bytes
* but 7 would be adequate.
*
* Bugs: No bounds checking is performed. Be careful.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: Character string in usual human readable format,
*
*
*------------------------------------------------------------------------------*/
void ax25_get_addr_no_ssid (packet_t this_p, int n, char *station)
{
int i;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (n < 0) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error detected in ax25_get_addr_no_ssid, %s, line %d.\n", __FILE__, __LINE__);
dw_printf ("Address index, %d, is less than zero.\n", n);
strlcpy (station, "??????", 7);
return;
}
if (n >= this_p->num_addr) {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error detected in ax25_get_no_with_ssid, %s, line %d.\n", __FILE__, __LINE__);
dw_printf ("Address index, %d, is too large for number of addresses, %d.\n", n, this_p->num_addr);
strlcpy (station, "??????", 7);
return;
}
memset (station, 0, 7);
for (i=0; i<6; i++) {
unsigned char ch;
ch = (this_p->frame_data[n*7+i] >> 1) & 0x7f;
if (ch <= ' ') break;
station[i] = ch;
}
} /* end ax25_get_addr_no_ssid */
/*------------------------------------------------------------------------------
*
* Name: ax25_get_ssid
*
* Purpose: Return SSID of specified address in current packet.
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: Substation id, as integer 0 .. 15.
*
*------------------------------------------------------------------------------*/
int ax25_get_ssid (packet_t this_p, int n)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (n >= 0 && n < this_p->num_addr) {
return ((this_p->frame_data[n*7+6] & SSID_SSID_MASK) >> SSID_SSID_SHIFT);
}
else {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error: ax25_get_ssid(%d), num_addr=%d\n", n, this_p->num_addr);
return (0);
}
}
/*------------------------------------------------------------------------------
*
* Name: ax25_set_ssid
*
* Purpose: Set the SSID of specified address in current packet.
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* ssid - New SSID. Must be in range of 0 to 15.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Bugs: Rewrite to keep call and SSID separate internally.
*
*------------------------------------------------------------------------------*/
void ax25_set_ssid (packet_t this_p, int n, int ssid)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (n >= 0 && n < this_p->num_addr) {
this_p->frame_data[n*7+6] = (this_p->frame_data[n*7+6] & ~ SSID_SSID_MASK) |
((ssid << SSID_SSID_SHIFT) & SSID_SSID_MASK) ;
}
else {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error: ax25_set_ssid(%d,%d), num_addr=%d\n", n, ssid, this_p->num_addr);
}
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_h
*
* Purpose: Return "has been repeated" flag of specified address in current packet.
*
* Inputs: n - Index of address. Use the symbols
* AX25_DESTINATION, AX25_SOURCE, AX25_REPEATER1, etc.
*
* Bugs: No bounds checking is performed. Be careful.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: True or false.
*
*------------------------------------------------------------------------------*/
int ax25_get_h (packet_t this_p, int n)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
assert (n >= 0 && n < this_p->num_addr);
if (n >= 0 && n < this_p->num_addr) {
return ((this_p->frame_data[n*7+6] & SSID_H_MASK) >> SSID_H_SHIFT);
}
else {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error: ax25_get_h(%d), num_addr=%d\n", n, this_p->num_addr);
return (0);
}
}
/*------------------------------------------------------------------------------
*
* Name: ax25_set_h
*
* Purpose: Set the "has been repeated" flag of specified address in current packet.
*
* Inputs: n - Index of address. Use the symbols
* Should be in range of AX25_REPEATER_1 .. AX25_REPEATER_8.
*
* Bugs: No bounds checking is performed. Be careful.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: None
*
*------------------------------------------------------------------------------*/
void ax25_set_h (packet_t this_p, int n)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (n >= 0 && n < this_p->num_addr) {
this_p->frame_data[n*7+6] |= SSID_H_MASK;
}
else {
text_color_set(DW_COLOR_ERROR);
dw_printf ("Internal error: ax25_set_hd(%d), num_addr=%d\n", n, this_p->num_addr);
}
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_heard
*
* Purpose: Return index of the station that we heard.
*
* Inputs: none
*
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: If any of the digipeaters have the has-been-repeated bit set,
* return the index of the last one. Otherwise return index for source.
*
*------------------------------------------------------------------------------*/
int ax25_get_heard(packet_t this_p)
{
int i;
int result;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
result = AX25_SOURCE;
for (i = AX25_REPEATER_1; i < ax25_get_num_addr(this_p); i++) {
if (ax25_get_h(this_p,i)) {
result = i;
}
}
return (result);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_first_not_repeated
*
* Purpose: Return index of the first repeater that does NOT have the
* "has been repeated" flag set or -1 if none.
*
* Inputs: none
*
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: In range of X25_REPEATER_1 .. X25_REPEATER_8 or -1 if none.
*
*------------------------------------------------------------------------------*/
int ax25_get_first_not_repeated(packet_t this_p)
{
int i;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
for (i = AX25_REPEATER_1; i < ax25_get_num_addr(this_p); i++) {
if ( ! ax25_get_h(this_p,i)) {
return (i);
}
}
return (-1);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_info
*
* Purpose: Obtain Information part of current packet.
*
* Inputs: None.
*
* Outputs: paddr - Starting address is returned here.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: Number of octets in the Information part.
* Should be in the range of AX25_MIN_INFO_LEN .. AX25_MAX_INFO_LEN.
*
*------------------------------------------------------------------------------*/
int ax25_get_info (packet_t this_p, unsigned char **paddr)
{
unsigned char *info_ptr;
int info_len;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (this_p->num_addr >= 2) {
/* AX.25 */
info_ptr = this_p->frame_data + ax25_get_info_offset(this_p);
info_len = ax25_get_num_info(this_p);
}
else {
/* Not AX.25. Treat Whole packet as info. */
info_ptr = this_p->frame_data;
info_len = this_p->frame_len;
}
/* Add nul character in case caller treats as printable string. */
assert (info_len >= 0);
info_ptr[info_len] = '\0';
*paddr = info_ptr;
return (info_len);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_dti
*
* Purpose: Get Data Type Identifier from Information part.
*
* Inputs: None.
*
* Assumption: ax25_from_text or ax25_from_frame was called first.
*
* Returns: First byte from the information part.
*
*------------------------------------------------------------------------------*/
int ax25_get_dti (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (this_p->num_addr >= 2) {
return (this_p->frame_data[ax25_get_info_offset(this_p)]);
}
return (' ');
}
/*------------------------------------------------------------------------------
*
* Name: ax25_set_nextp
*
* Purpose: Set next packet object in queue.
*
* Inputs: this_p - Current packet object.
*
* next_p - pointer to next one
*
* Description: This is used to build a linked list for a queue.
*
*------------------------------------------------------------------------------*/
void ax25_set_nextp (packet_t this_p, packet_t next_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
this_p->nextp = next_p;
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_nextp
*
* Purpose: Obtain next packet object in queue.
*
* Inputs: Packet object.
*
* Returns: Following object in queue or NULL.
*
*------------------------------------------------------------------------------*/
packet_t ax25_get_nextp (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
return (this_p->nextp);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_set_release_time
*
* Purpose: Set release time
*
* Inputs: this_p - Current packet object.
*
* release_time - Time as returned by dtime_now().
*
*------------------------------------------------------------------------------*/
void ax25_set_release_time (packet_t this_p, double release_time)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
this_p->release_time = release_time;
}
/*------------------------------------------------------------------------------
*
* Name: ax25_get_release_time
*
* Purpose: Get release time.
*
*------------------------------------------------------------------------------*/
double ax25_get_release_time (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
return (this_p->release_time);
}
/*------------------------------------------------------------------
*
* Function: ax25_format_addrs
*
* Purpose: Format all the addresses suitable for printing.
*
* The AX.25 spec refers to this as "Source Path Header" - "TNC-2" Format
*
* Inputs: Current packet.
*
* Outputs: result - All addresses combined into a single string of the form:
*
* "Source > Destination [ , repeater ... ] :"
*
* An asterisk is displayed after the last digipeater
* with the "H" bit set. e.g. If we hear RPT2,
*
* SRC>DST,RPT1,RPT2*,RPT3:
*
* No asterisk means the source is being heard directly.
* Needs to be 101 characters to avoid overflowing.
* (Up to 100 characters + \0)
*
* Errors: No error checking so caller needs to be careful.
*
*
*------------------------------------------------------------------*/
// TODO: max len for result. buffer overflow?
void ax25_format_addrs (packet_t this_p, char *result)
{
int i;
int heard;
char stemp[AX25_MAX_ADDR_LEN];
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
*result = '\0';
/* New in 0.9. */
/* Don't get upset if no addresses. */
/* This will allow packets that do not comply to AX.25 format. */
if (this_p->num_addr == 0) {
return;
}
ax25_get_addr_with_ssid (this_p, AX25_SOURCE, stemp);
strcat (result, stemp);
strcat (result, ">");
ax25_get_addr_with_ssid (this_p, AX25_DESTINATION, stemp);
strcat (result, stemp);
heard = ax25_get_heard(this_p);
for (i=(int)AX25_REPEATER_1; i<this_p->num_addr; i++) {
ax25_get_addr_with_ssid (this_p, i, stemp);
strcat (result, ",");
strcat (result, stemp);
if (i == heard) {
strcat (result, "*");
}
}
strcat (result, ":");
}
/*------------------------------------------------------------------
*
* Function: ax25_pack
*
* Purpose: Put all the pieces into format ready for transmission.
*
* Inputs: this_p - pointer to packet object.
*
* Outputs: result - Frame buffer, AX25_MAX_PACKET_LEN bytes.
* Should also have two extra for FCS to be
* added later.
*
* Returns: Number of octets in the frame buffer.
* Does NOT include the extra 2 for FCS.
*
* Errors: Returns -1.
*
*------------------------------------------------------------------*/
int ax25_pack (packet_t this_p, unsigned char result[AX25_MAX_PACKET_LEN])
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
assert (this_p->frame_len > 0 && this_p->frame_len <= AX25_MAX_PACKET_LEN);
memcpy (result, this_p->frame_data, this_p->frame_len);
return (this_p->frame_len);
}
/*------------------------------------------------------------------
*
* Function: ax25_frame_type
*
* Purpose: Extract the type of frame.
* This is derived from the control byte(s) but
* is an enumerated type for easier handling.
*
* Inputs: this_p - pointer to packet object.
*
* modulo - We often need to know this because context is
* required to know if control is 1 or 2 bytes.
*
* Outputs: desc - Text description such as "I frame" or
* "U frame SABME".
* Supply 16 bytes to be safe.
*
* pf - P/F - Poll/Final or -1 if not applicable
*
* nr - N(R) - receive sequence or -1 if not applicable.
*
* ns - N(S) - send sequence or -1 if not applicable.
*
* Returns: Frame type from enum ax25_frame_type_e.
*
*------------------------------------------------------------------*/
// TODO: need someway to ensure caller allocated enough space.
#define DESC_SIZ 32
ax25_frame_type_t ax25_frame_type (packet_t this_p, ax25_modulo_t modulo, char *desc, int *pf, int *nr, int *ns)
{
int c; // U frames are always one control byte.
int c2; // I & S frames can have second Control byte.
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
strlcpy (desc, "????", DESC_SIZ);
*pf = -1;
*nr = -1;
*ns = -1;
c = ax25_get_control(this_p);
if (c < 0) {
strlcpy (desc, "Not AX.25", DESC_SIZ);
return (frame_not_AX25);
}
if (modulo == modulo_128) {
c2 = ax25_get_c2 (this_p);
}
if ((c & 1) == 0) {
// Information rrr p sss 0 or sssssss 0 rrrrrrr p
if (modulo == modulo_128) {
*ns = (c >> 1) & 0x7f;
*pf = c2 & 1;
*nr = (c2 >> 1) & 0x7f;
}
else {
*ns = (c >> 1) & 7;
*pf = (c >> 4) & 1;
*nr = (c >> 5) & 7;
}
snprintf (desc, DESC_SIZ, "I frame, n(s)= %d, n(r)=%d, p=%d", *ns, *nr, *pf);
return (frame_type_I);
}
else if ((c & 2) == 0) {
// Supervisory rrr p/f ss 0 1 or 0000 ss 0 1 rrrrrrr p/f
if (modulo == modulo_128) {
*pf = c2 & 1;
*nr = (c2 >> 1) & 0x7f;
}
else {
*pf = (c >> 4) & 1;
*nr = (c >> 5) & 7;
}
switch ((c >> 2) & 3) {
case 0: snprintf (desc, DESC_SIZ, "S frame RR, n(r)=%d, p/f=%d", *nr, *pf); return (frame_type_S_RR); break;
case 1: snprintf (desc, DESC_SIZ, "S frame RNR, n(r)=%d, p/f=%d", *nr, *pf); return (frame_type_S_RNR); break;
case 2: snprintf (desc, DESC_SIZ, "S frame REJ, n(r)=%d, p/f=%d", *nr, *pf); return (frame_type_S_REJ); break;
case 3: snprintf (desc, DESC_SIZ, "S frame SREJ, n(r)=%d, p/f=%d", *nr, *pf); return (frame_type_S_SREJ); break;
}
}
else {
// Unnumbered mmm p/f mm 1 1
*pf = (c >> 4) & 1;
switch (c & 0xef) {
case 0x6f: snprintf (desc, DESC_SIZ, "U frame SABME, p=%d", *pf); return (frame_type_U_SABME); break;
case 0x2f: snprintf (desc, DESC_SIZ, "U frame SABM, p=%d", *pf); return (frame_type_U_SABM); break;
case 0x43: snprintf (desc, DESC_SIZ, "U frame DISC, p=%d", *pf); return (frame_type_U_DISC); break;
case 0x0f: snprintf (desc, DESC_SIZ, "U frame DM, f=%d", *pf); return (frame_type_U_DM); break;
case 0x63: snprintf (desc, DESC_SIZ, "U frame UA, f=%d", *pf); return (frame_type_U_UA); break;
case 0x87: snprintf (desc, DESC_SIZ, "U frame FRMR, f=%d", *pf); return (frame_type_U_FRMR); break;
case 0x03: snprintf (desc, DESC_SIZ, "U frame UI, pf=%d", *pf); return (frame_type_U_UI); break;
case 0xaf: snprintf (desc, DESC_SIZ, "U frame XID, pf=%d", *pf); return (frame_type_U_XID); break;
case 0xe3: snprintf (desc, DESC_SIZ, "U frame TEST, pf=%d", *pf); return (frame_type_U_TEST); break;
default: snprintf (desc, DESC_SIZ, "U frame ???"); return (frame_type_U); break;
}
}
// Should be unreachable but compiler doesn't realize that.
// Here only to suppress "warning: control reaches end of non-void function"
return (frame_not_AX25);
} /* end ax25_frame_type */
/*------------------------------------------------------------------
*
* Function: ax25_hex_dump
*
* Purpose: Print out packet in hexadecimal for debugging.
*
* Inputs: fptr - Pointer to frame data.
*
* flen - Frame length, bytes. Does not include CRC.
*
*------------------------------------------------------------------*/
static void hex_dump (unsigned char *p, int len)
{
int n, i, offset;
offset = 0;
while (len > 0) {
n = len < 16 ? len : 16;
dw_printf (" %03x: ", offset);
for (i=0; i<n; i++) {
dw_printf (" %02x", p[i]);
}
for (i=n; i<16; i++) {
dw_printf (" ");
}
dw_printf (" ");
for (i=0; i<n; i++) {
dw_printf ("%c", isprint(p[i]) ? p[i] : '.');
}
dw_printf ("\n");
p += 16;
offset += 16;
len -= 16;
}
}
/* Text description of control octet. */
// TODO: use ax25_frame_type() instead.
static void ctrl_to_text (int c, char *out, size_t outsiz)
{
if ((c & 1) == 0) { snprintf (out, outsiz, "I frame: n(r)=%d, p=%d, n(s)=%d", (c>>5)&7, (c>>4)&1, (c>>1)&7); }
else if ((c & 0xf) == 0x01) { snprintf (out, outsiz, "S frame RR: n(r)=%d, p/f=%d", (c>>5)&7, (c>>4)&1); }
else if ((c & 0xf) == 0x05) { snprintf (out, outsiz, "S frame RNR: n(r)=%d, p/f=%d", (c>>5)&7, (c>>4)&1); }
else if ((c & 0xf) == 0x09) { snprintf (out, outsiz, "S frame REJ: n(r)=%d, p/f=%d", (c>>5)&7, (c>>4)&1); }
else if ((c & 0xf) == 0x0D) { snprintf (out, outsiz, "S frame sREJ: n(r)=%d, p/f=%d", (c>>5)&7, (c>>4)&1); }
else if ((c & 0xef) == 0x6f) { snprintf (out, outsiz, "U frame SABME: p=%d", (c>>4)&1); }
else if ((c & 0xef) == 0x2f) { snprintf (out, outsiz, "U frame SABM: p=%d", (c>>4)&1); }
else if ((c & 0xef) == 0x43) { snprintf (out, outsiz, "U frame DISC: p=%d", (c>>4)&1); }
else if ((c & 0xef) == 0x0f) { snprintf (out, outsiz, "U frame DM: f=%d", (c>>4)&1); }
else if ((c & 0xef) == 0x63) { snprintf (out, outsiz, "U frame UA: f=%d", (c>>4)&1); }
else if ((c & 0xef) == 0x87) { snprintf (out, outsiz, "U frame FRMR: f=%d", (c>>4)&1); }
else if ((c & 0xef) == 0x03) { snprintf (out, outsiz, "U frame UI: p/f=%d", (c>>4)&1); }
else if ((c & 0xef) == 0xAF) { snprintf (out, outsiz, "U frame XID: p/f=%d", (c>>4)&1); }
else if ((c & 0xef) == 0xe3) { snprintf (out, outsiz, "U frame TEST: p/f=%d", (c>>4)&1); }
else { snprintf (out, outsiz, "Unknown frame type for control = 0x%02x", c); }
}
/* Text description of protocol id octet. */
#define PID_TEXT_SIZE 80
static void pid_to_text (int p, char out[PID_TEXT_SIZE])
{
if ((p & 0x30) == 0x10) { snprintf (out, PID_TEXT_SIZE, "AX.25 layer 3 implemented."); }
else if ((p & 0x30) == 0x20) { snprintf (out, PID_TEXT_SIZE, "AX.25 layer 3 implemented."); }
else if (p == 0x01) { snprintf (out, PID_TEXT_SIZE, "ISO 8208/CCITT X.25 PLP"); }
else if (p == 0x06) { snprintf (out, PID_TEXT_SIZE, "Compressed TCP/IP packet. Van Jacobson (RFC 1144)"); }
else if (p == 0x07) { snprintf (out, PID_TEXT_SIZE, "Uncompressed TCP/IP packet. Van Jacobson (RFC 1144)"); }
else if (p == 0x08) { snprintf (out, PID_TEXT_SIZE, "Segmentation fragment"); }
else if (p == 0xC3) { snprintf (out, PID_TEXT_SIZE, "TEXNET datagram protocol"); }
else if (p == 0xC4) { snprintf (out, PID_TEXT_SIZE, "Link Quality Protocol"); }
else if (p == 0xCA) { snprintf (out, PID_TEXT_SIZE, "Appletalk"); }
else if (p == 0xCB) { snprintf (out, PID_TEXT_SIZE, "Appletalk ARP"); }
else if (p == 0xCC) { snprintf (out, PID_TEXT_SIZE, "ARPA Internet Protocol"); }
else if (p == 0xCD) { snprintf (out, PID_TEXT_SIZE, "ARPA Address resolution"); }
else if (p == 0xCE) { snprintf (out, PID_TEXT_SIZE, "FlexNet"); }
else if (p == 0xCF) { snprintf (out, PID_TEXT_SIZE, "NET/ROM"); }
else if (p == 0xF0) { snprintf (out, PID_TEXT_SIZE, "No layer 3 protocol implemented."); }
else if (p == 0xFF) { snprintf (out, PID_TEXT_SIZE, "Escape character. Next octet contains more Level 3 protocol information."); }
else { snprintf (out, PID_TEXT_SIZE, "Unknown protocol id = 0x%02x", p); }
}
void ax25_hex_dump (packet_t this_p)
{
int n;
unsigned char *fptr = this_p->frame_data;
int flen = this_p->frame_len;
if (this_p->num_addr >= AX25_MIN_ADDRS && this_p->num_addr <= AX25_MAX_ADDRS) {
int c, p;
char cp_text[120];
char l_text[20];
c = fptr[this_p->num_addr*7];
p = fptr[this_p->num_addr*7+1];
ctrl_to_text (c, cp_text, sizeof(cp_text)); // TODO: use ax25_frame_type() instead.
if ( (c & 0x01) == 0 || /* I xxxx xxx0 */
c == 0x03 || c == 0x13) { /* UI 000x 0011 */
char pid_text[PID_TEXT_SIZE];
pid_to_text (p, pid_text);
strlcat (cp_text, ", ", sizeof(cp_text));
strlcat (cp_text, pid_text, sizeof(cp_text));
}
snprintf (l_text, sizeof(l_text), ", length = %d", flen);
strlcat (cp_text, l_text, sizeof(cp_text));
dw_printf ("%s\n", cp_text);
}
dw_printf (" dest %c%c%c%c%c%c %2d c/r=%d res=%d last=%d\n",
fptr[0]>>1, fptr[1]>>1, fptr[2]>>1, fptr[3]>>1, fptr[4]>>1, fptr[5]>>1,
(fptr[6]&SSID_SSID_MASK)>>SSID_SSID_SHIFT,
(fptr[6]&SSID_H_MASK)>>SSID_H_SHIFT,
(fptr[6]&SSID_RR_MASK)>>SSID_RR_SHIFT,
fptr[6]&SSID_LAST_MASK);
dw_printf (" source %c%c%c%c%c%c %2d c/r=%d res=%d last=%d\n",
fptr[7]>>1, fptr[8]>>1, fptr[9]>>1, fptr[10]>>1, fptr[11]>>1, fptr[12]>>1,
(fptr[13]&SSID_SSID_MASK)>>SSID_SSID_SHIFT,
(fptr[13]&SSID_H_MASK)>>SSID_H_SHIFT,
(fptr[13]&SSID_RR_MASK)>>SSID_RR_SHIFT,
fptr[13]&SSID_LAST_MASK);
for (n=2; n<this_p->num_addr; n++) {
dw_printf (" digi %d %c%c%c%c%c%c %2d h=%d res=%d last=%d\n",
n - 1,
fptr[n*7+0]>>1, fptr[n*7+1]>>1, fptr[n*7+2]>>1, fptr[n*7+3]>>1, fptr[n*7+4]>>1, fptr[n*7+5]>>1,
(fptr[n*7+6]&SSID_SSID_MASK)>>SSID_SSID_SHIFT,
(fptr[n*7+6]&SSID_H_MASK)>>SSID_H_SHIFT,
(fptr[n*7+6]&SSID_RR_MASK)>>SSID_RR_SHIFT,
fptr[n*7+6]&SSID_LAST_MASK);
}
hex_dump (fptr, flen);
} /* end ax25_hex_dump */
/*------------------------------------------------------------------
*
* Function: ax25_is_aprs
*
* Purpose: Is this packet APRS format?
*
* Inputs: this_p - pointer to packet object.
*
* Returns: True if this frame has the proper control
* octets for an APRS packet.
* control 3 for UI frame
* protocol id 0xf0 for no layer 3
*
*
* Description: Dire Wolf should be able to act as a KISS TNC for
* any type of AX.25 activity. However, there are other
* places where we want to process only APRS.
* (e.g. digipeating and IGate.)
*
*------------------------------------------------------------------*/
int ax25_is_aprs (packet_t this_p)
{
int ctrl, pid, is_aprs;
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
ctrl = ax25_get_control(this_p);
pid = ax25_get_pid(this_p);
is_aprs = this_p->num_addr >= 2 && ctrl == AX25_UI_FRAME && pid == AX25_NO_LAYER_3;
#if 0
text_color_set(DW_COLOR_ERROR);
dw_printf ("ax25_is_aprs(): ctrl=%02x, pid=%02x, is_aprs=%d\n", ctrl, pid, is_aprs);
#endif
return (is_aprs);
}
/*------------------------------------------------------------------
*
* Function: ax25_get_control
ax25_get_c2
*
* Purpose: Get Control field from packet.
*
* Inputs: this_p - pointer to packet object.
*
* Returns: APRS uses AX25_UI_FRAME.
* This could also be used in other situations.
*
*------------------------------------------------------------------*/
int ax25_get_control (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (this_p->num_addr >= 2) {
return (this_p->frame_data[ax25_get_control_offset(this_p)]);
}
return (-1);
}
int ax25_get_c2 (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
if (this_p->num_addr >= 2) {
return (this_p->frame_data[ax25_get_control_offset(this_p)+1]);
}
return (-1);
}
/*------------------------------------------------------------------
*
* Function: ax25_get_pid
*
* Purpose: Get protocol ID from packet.
*
* Inputs: this_p - pointer to packet object.
*
* Returns: APRS uses 0xf0 for no layer 3.
* This could also be used in other situations.
*
* AX.25: "The Protocol Identifier (PID) field appears in information
* frames (I and UI) only. It identifies which kind of
* Layer 3 protocol, if any, is in use."
*
*------------------------------------------------------------------*/
int ax25_get_pid (packet_t this_p)
{
assert (this_p->magic1 == MAGIC);
assert (this_p->magic2 == MAGIC);
// TODO: handle 2 control byte case.
// TODO: sanity check: is it I or UI frame?
if (this_p->num_addr >= 2) {
return (this_p->frame_data[ax25_get_pid_offset(this_p)]);
}
return (-1);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_dedupe_crc
*
* Purpose: Calculate a checksum for the packet source, destination, and
* information but NOT the digipeaters.
* This is used for duplicate detection in the digipeater
* and IGate algorithms.
*
* Input: pp - Pointer to packet object.
*
* Returns: Value which will be the same for a duplicate but very unlikely
* to match a non-duplicate packet.
*
* Description: For detecting duplicates, we need to look
* + source station
* + destination
* + information field
* but NOT the changing list of digipeaters.
*
* Typically, only a checksum is kept to reduce memory
* requirements and amount of compution for comparisons.
* There is a very very small probability that two unrelated
* packets will result in the same checksum, and the
* undesired dropping of the packet.
*
* There is a 1 / 65536 chance of getting a false positive match
* which is good enough for this application.
* We could reduce that with a 32 bit CRC instead of reusing
* code from the AX.25 frame CRC calculation.
*
* Version 1.3: We exclude any trailing CR/LF at the end of the info part
* so we can detect duplicates that are received only over the
* air and those which have gone thru an IGate where the process
* removes any trailing CR/LF. Example:
*
* Original via RF only:
* W1TG-1>APU25N,N3LEE-10*,WIDE2-1:<IGATE,MSG_CNT=30,LOC_CNT=61<0x0d>
*
* When we get the same thing via APRS-IS:
* W1TG-1>APU25N,K1FFK,WIDE2*,qAR,WB2ZII-15:<IGATE,MSG_CNT=30,LOC_CNT=61
*
* (Actually there is a trailing space. Maybe some systems
* change control characters to space???)
* Hmmmm. I guess we should ignore trailing space as well for
* duplicate detection and suppression.
*
*------------------------------------------------------------------------------*/
unsigned short ax25_dedupe_crc (packet_t pp)
{
unsigned short crc;
char src[AX25_MAX_ADDR_LEN];
char dest[AX25_MAX_ADDR_LEN];
unsigned char *pinfo;
int info_len;
ax25_get_addr_with_ssid(pp, AX25_SOURCE, src);
ax25_get_addr_with_ssid(pp, AX25_DESTINATION, dest);
info_len = ax25_get_info (pp, &pinfo);
while (info_len >= 1 && (pinfo[info_len-1] == '\r' ||
pinfo[info_len-1] == '\n' ||
pinfo[info_len-1] == ' ')) {
// Temporary for debugging!
// if (pinfo[info_len-1] == ' ') {
// text_color_set(DW_COLOR_ERROR);
// dw_printf ("DEBUG: ax25_dedupe_crc ignoring trailing space.\n");
// }
info_len--;
}
crc = 0xffff;
crc = crc16((unsigned char *)src, strlen(src), crc);
crc = crc16((unsigned char *)dest, strlen(dest), crc);
crc = crc16(pinfo, info_len, crc);
return (crc);
}
/*------------------------------------------------------------------------------
*
* Name: ax25_m_m_crc
*
* Purpose: Calculate a checksum for the packet.
* This is used for the multimodem duplicate detection.
*
* Input: pp - Pointer to packet object.
*
* Returns: Value which will be the same for a duplicate but very unlikely
* to match a non-duplicate packet.
*
* Description: For detecting duplicates, we need to look the entire packet.
*
* Typically, only a checksum is kept to reduce memory
* requirements and amount of compution for comparisons.
* There is a very very small probability that two unrelated
* packets will result in the same checksum, and the
* undesired dropping of the packet.
*------------------------------------------------------------------------------*/
unsigned short ax25_m_m_crc (packet_t pp)
{
unsigned short crc;
unsigned char fbuf[AX25_MAX_PACKET_LEN];
int flen;
flen = ax25_pack (pp, fbuf);
crc = 0xffff;
crc = crc16(fbuf, flen, crc);
return (crc);
}
/*------------------------------------------------------------------
*
* Function: ax25_safe_print
*
* Purpose: Print given string, changing non printable characters to
* hexadecimal notation. Note that character values
* <DEL>, 28, 29, 30, and 31 can appear in MIC-E message.
*
* Inputs: pstr - Pointer to string.
*
* len - Maximum length if not -1.
*
* ascii_only - Restrict output to only ASCII.
* Normally we allow UTF-8.
*
* Stops after non-zero len characters or at nul.
*
* Returns: none
*
* Description: Print a string in a "safe" manner.
* Anything that is not a printable character
* will be converted to a hexadecimal representation.
* For example, a Line Feed character will appear as <0x0a>
* rather than dropping down to the next line on the screen.
*
* ax25_from_text can accept this format.
*
*
* Example: W1MED-1>T2QP0S,N1OHZ,N8VIM*,WIDE1-1:'cQBl <0x1c>-/]<0x0d>
* ------ ------
*
* Questions: What should we do about UTF-8? Should that be displayed
* as hexadecimal for troubleshooting? Maybe an option so the
* packet raw data is in hexadecimal but an extracted
* comment displays UTF-8? Or a command line option for only ASCII?
*
* Trailing space:
* I recently noticed a case where a packet has space character
* at the end. If the last character of the line is a space,
* this will be displayed in hexadecimal to make it obvious.
*
*------------------------------------------------------------------*/
#define MAXSAFE 500
void ax25_safe_print (char *pstr, int len, int ascii_only)
{
int ch;
char safe_str[MAXSAFE*6+1];
int safe_len;
safe_len = 0;
safe_str[safe_len] = '\0';
if (len < 0)
len = strlen(pstr);
if (len > MAXSAFE)
len = MAXSAFE;
while (len > 0 && *pstr != '\0')
{
ch = *((unsigned char *)pstr);
if (ch == ' ' && (len == 1 || pstr[1] == '\0')) {
snprintf (safe_str + safe_len, sizeof(safe_str)-safe_len, "<0x%02x>", ch);
safe_len += 6;
}
else if (ch < ' ' || ch == 0x7f || ch == 0xfe || ch == 0xff ||
(ascii_only && ch >= 0x80) ) {
/* Control codes and delete. */
/* UTF-8 does not use fe and ff except in a possible */
/* "Byte Order Mark" (BOM) at the beginning. */
snprintf (safe_str + safe_len, sizeof(safe_str)-safe_len, "<0x%02x>", ch);
safe_len += 6;
}
else {
/* Let everything else thru so we can handle UTF-8 */
/* Maybe we should have an option to display 0x80 */
/* and above as hexadecimal. */
safe_str[safe_len++] = ch;
safe_str[safe_len] = '\0';
}
pstr++;
len--;
}
// TODO1.2: should return string rather printing to remove a race condition.
dw_printf ("%s", safe_str);
} /* end ax25_safe_print */
/*------------------------------------------------------------------
*
* Function: ax25_alevel_to_text
*
* Purpose: Convert audio level to text representation.
*
* Inputs: alevel - Audio levels collected from demodulator.
*
* Outputs: text - Text representation for presentation to user.
* Currently it will look something like this:
*
* r(m/s)
*
* With n,m,s corresponding to received, mark, and space.
* Comma is to be avoided because one place this
* ends up is in a CSV format file.
*
* size should be AX25_ALEVEL_TO_TEXT_SIZE.
*
* Returns: True if something to print. (currently if alevel.original >= 0)
* False if not.
*
* Description: Audio level used to be simple; it was a single number.
* In version 1.2, we start collecting more details.
* At the moment, it includes:
*
* - Received level from new method.
* - Levels from mark & space filters to examine the ratio.
*
* We print this in multiple places so put it into a function.
*
*------------------------------------------------------------------*/
int ax25_alevel_to_text (alevel_t alevel, char text[AX25_ALEVEL_TO_TEXT_SIZE])
{
if (alevel.rec < 0) {
strlcpy (text, "", AX25_ALEVEL_TO_TEXT_SIZE);
return (0);
}
// TODO1.2: haven't thought much about non-AFSK cases yet.
// What should we do for 9600 baud?
// For DTMF omit the two extra numbers.
if (alevel.mark >= 0 && alevel.space < 0) { /* baseband */
snprintf (text, AX25_ALEVEL_TO_TEXT_SIZE, "%d(%+d/%+d)", alevel.rec, alevel.mark, alevel.space);
}
else if (alevel.mark == -2 && alevel.space == -2) { /* DTMF */
snprintf (text, AX25_ALEVEL_TO_TEXT_SIZE, "%d", alevel.rec);
}
else { /* AFSK */
//snprintf (text, AX25_ALEVEL_TO_TEXT_SIZE, "%d:%d(%d/%d=%05.3f=)", alevel.original, alevel.rec, alevel.mark, alevel.space, alevel.ms_ratio);
snprintf (text, AX25_ALEVEL_TO_TEXT_SIZE, "%d(%d/%d)", alevel.rec, alevel.mark, alevel.space);
}
return (1);
} /* end ax25_alevel_to_text */
/* end ax25_pad.c */